To do this tutorial you must first download the FREE EasyArt actions "Halftone Printer" from our down loads page.

This set of actions will allow you to automatically print out your separations with halftone dots on any printer.
Read the instructions (readme file) included with the download on how to load actions into Photoshop.

To use the "Printer Halftone" actions you must have already separated your image into individual spot color channels.
Next setup your printer.
Go to "Page Setup" ( File > Page Setup, Photoshop7 "Print with Preview") select your printer and set it to print out in black & white at high resolution and set the paper orientation to portrait or landscape.
Select the "Registration Marks" and "Labels" boxes and click OK (Photoshop 7 click "Done")
To print out your halftone select one of your separated channels then go to the actions list and click on one of the EasyArt green "Print Halftone ..." buttons (which ever Lpi you require, make sure you use the same one for each channel you print out) and that will output automatically through your printer (if you have set it up). You only need to setup the printer once, not for each individual channel. To print out the next channel just select it and click on the green "Print Halftone ..." button again